Evinrude E-tec 150hp G2 Direct Injection Outboard  (Listed Fri, 26 Apr 13)AUD $21,300

Evinrude E-tec 150hp G2 Direct Injection Outboard
    THIS LISTING HAS SOLD

  • Condition: New
  • Brand: Evinrude
  • Model: E150
  • Year: 2018
  • Length: 0.00 Metres
  • Stock Number: NEW EVI 150

Evinrude Etec 150HP Direct Injection Outboard
 

Model           Weight                Shaft Length
C150PL       225 kgs                20" / 508 mm
C150PX       230 kgs                25" / 635 mm
C150PXC    232 kgs                25" / 635 mm

HIGH OUTPUT MODELS
C150FLH              240 kgs       20" / 508 mm
C150FXH             245 kgs       25" / 635 mm
C150PLH             225 kgs       20" / 508 mm
C150PXH             230 kgs      25" / 635 mm
C150XHC             242 kgs      25" / 635 mm


Advertised Price is for the 150FXH HIGH OUTPUT Engine
Comes STD with 4.3inch Screen, Control Box, and S/Steel Prop!

WHY IS EVINRUDE E-TEC TECHNOLOGY SO GOOD?
With blinding power and low emissions, BRP's 2-stroke direct injected Evinrude E-TEC outboard engines provide the best of both worlds. Evinrude E-TEC engines:produce 80% lower CO emissions than an idling four-stroke engine, use 50% less oil than a conventional direct-injection outboard engine, are quieter to operate and require little to no maintenance. BRP is the only marine manufacturer to win the EPA's Clean Air Technology Excellence Award for its Evinrude E-TEC outboard engines.

Got a question? Please fill out the enquiry form and we will respond ASAP!

*Price shown is for 150hp FXH (25 inch shaft)
*Price includes Prop and STD Rig Kit
*Price not inclusive of fitting or pre delivery

Common Elements
Limited Warranty             3 + 2 Years
Engine type        V6 66° E-TEC D.I.
Displacement    167 cu in / 2744 cc / 2.7L
Recommended fuel        87 Octane
Emissions compliance    EPA 2013 / CARB 3 STAR / European Union
Recommended Oil          Evinrude/ Johnson XD-100 Oil
Oil Tank capacity               On-Engine 3 gal / 11.4 L / Accessory 1.8 gal / 6.8 L & 3 gal / 11.3 L & 10 gal / 37.85 L
Full Throttle RPM Range               5000-6000 RPM
Alternator output            133 Amps Total / 50 net Dedicated /14 amps @ idle
Fuel induction   E-TEC Direct Injection with stratified low RPM combustion mode
Lubrication          Multi-Point Targeted Oiling
Bore x Stroke     3.386 in x 3.100 in / 86 mm x 78.7 mm


 

Have a Question about the Evinrude E-tec 150hp G2 Direct Injection Outboard?

Name

Email

Phone

Your Question or Enquiry